2. mark 'take off with engine' which appears only if the DG808M is selected
3. select i.e.'free flight B Take of from ground....' on the 'flight planning' tab
4. on the 'realism' tab mark 'allow engine use' (last row)
You will be placed on the glider field with a slight offset to the 'normal' start position in order to allow the AI gliders operation.
5. Press 'SPACE' to start the simulation as usual.
6. Now press 'e' to start the engine. You will hear the engine extend. After 13seconds the engine is extented and starts running in idle power.
7. You now may select the power setting via 'SHIFT+0' (Full power). The digit selects the setting: 1=10% to 0=100% power.
That it!!
If you are in the air (glider mode) and want to extend the engine make sure that the speed is below 108km/h before pressing 'e'. Otherwise the engine will not extend!!
Have fun
Detlev"
Én így sem tudom használni a motort. Akárhogy nyomkodom a shift+ 1 vagy 0-át, de akkor sem mûködik a motor. Please help.